• Odor Remover
• Floor Finish Remover

• Blockade areas to be stripped. Floors will become very slippery when stripper is applied. Exercise caution.
• Gloves, goggles and protective footwear is recommended when using this product
• Dilute or dispense using cold water
• Apply liberal amounts of stripper solution uniformly to floor with mop. Start at edges to provide more soak time. If splashing occurs, wipe off surfaces with a clean, damp rag.
• Let stripper solution soak 10-15 minutes. Mop agitate to loosen finish. Re-wet as necessary. Do not allow solution to dry on floor. Longer soak times may be necessary in cases of extreme buildup.
• Hand or machine scrub thoroughly using appropriate stripper pads or stripping brush. Pick up all solution with a clean mop, wet vac, or automatic scrubber. Mop up any 'tracks' left by wet vacs or scrubbers before they dry.
• Thoroughly rinse floor with clean water, using a mop and bucket. Let floor dry completely before applying a Diversey Green Seal®-Certified finish or other recommended Diversey brand floor finish or sealer.

• Floor
• Industry
• Institutional

• Low Odor
• No-mess
• Non Ammoniated
• Butyl-free

Green Seal Certified